Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 session 15 ,always enter router(boot)> mode

Dear,ALL

When i enter L3 of 6509,I always got the Router(boo)>

There is a file for bootldr

Thanks a lot

Jason

1 REPLY
Cisco Employee

Re: 6509 session 15 ,always enter router(boot)> mode

Hi Jason,

I believe you only have the boot file for your msfc which is taking you to the boot prompt but not the imain IOS image to load the router to give you full functionality.

Check with

Router(boot)>dir bootflash:

And see what all file you see. Also if you do not have the main IOS file you can load it via tftp but if you have the main IOS image in your msfc bootflash you can boot the router manually and then set the bootpath.

Make sure you have set the correct boot path for main IOS image and config register value is set to 0x2102

HTH

Ankur

*Pls rate all helpfull post

183
Views
0
Helpful
1
Replies