Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 Show Env

Hello,

Could you please post your comment about this output from show env.

Please focus on Power Supply 2 is that something wrong with that ?

power-supply 1:

power-supply 1 fan-fail: OK

power-supply 1 power-input: AC high

power-supply 1 power-output-fail: OK

power-supply 2:

power-supply 2 fan-fail: OK

power-supply 2 power-input: AC low

power-supply 2 power-output-fail: failed

By the way is there any documents which explains what is what in output of show env ?

Regards

Ersin

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 6509 Show Env

Explaination:

power-supply 2 fan-fail: OK < --- Means that the extraction fan is functioning properly.

power-supply 2 power-input: AC low < --- Means that instead of receiving full power, it's only getting half power.

power-supply 2 power-output-fail: failed < --- Means that 1 of the 2 power cables are either connected or powered.

13 REPLIES
Hall of Fame Super Gold

Re: 6509 Show Env

Hi Ersin,

How many power cables are connected to PS2? 1 out of 2? Provide 2 power "juice" to PS2 and this should fix your problem.

New Member

Re: 6509 Show Env

Besides solution

I was trying to understand the output of the show env command.For example what do you see there as a error

Regards

Ersin

New Member

Re: 6509 Show Env

Besides solution

I was trying to understand the output of the show env command.For example what do you see there as a error

Regards

Ersin

Hall of Fame Super Gold

Re: 6509 Show Env

Explaination:

power-supply 2 fan-fail: OK < --- Means that the extraction fan is functioning properly.

power-supply 2 power-input: AC low < --- Means that instead of receiving full power, it's only getting half power.

power-supply 2 power-output-fail: failed < --- Means that 1 of the 2 power cables are either connected or powered.

New Member

Re: 6509 Show Env

Thx for the answer

By the way do you know any documents which explains all show env arguments ?

Ersin

Hall of Fame Super Gold

Re: 6509 Show Env

Hi Ersin,

Thanks for the ratings.

fly
New Member

Re: 6509 Show Env

power-supply 1:

  power-supply 1 fan-fail: OK

  power-supply 1 power-input: DC<<<<<<<<<<<<<<<<<<<<   how can we explain this we replace a ac power WS-CAC-4000W-INT

  power-supply 1 power-output-fail: OK

power-supply 2:

  power-supply 2 fan-fail: OK

  power-supply 2 power-input: AC high

  power-supply 2 power-output-fail: OK

JS-access1#show power

system power redundancy mode = redundant

system power total =     3830.40 Watts (91.20 Amps @ 42V)

system power used =      2811.48 Watts (66.94 Amps @ 42V)

system power available = 1018.92 Watts (24.26 Amps @ 42V)

                        Power-Capacity PS-Fan Output Oper

PS   Type               Watts   A @42V Status Status State

---- ------------------ ------- ------ ------ ------ -----

1    WS-CAC-4000W-INT   3830.40 91.20  OK     OK     on

2    WS-CAC-4000W-INT   3795.12 90.36  OK     OK     on

                        Pwr-Allocated  Oper

Fan  Type               Watts   A @42V State

---- ------------------ ------- ------ -----

1    WS-C6509-E-FAN      150.36  3.58  OK

                        Pwr-Requested  Pwr-Allocated  Admin Oper

Hall of Fame Super Gold

6509 Show Env

power-supply 1 power-input: DC<<<<<<<<<<<<<<<<<<<<   how can we explain this we replace a ac power WS-CAC-4000W-INT

Means that both of your power supplies are 4000 w and uses DC power input (instead of traditional AC).

fly
New Member

6509 Show Env

But this power is AC power.  Why power input is DC

The other same model AC display AC input

1022
Views
10
Helpful
13
Replies