Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 Sup720 3BXL can not load bootimage 122-33.SXH1

Hello,

I wonder if anyone had tried loading s72033-boot-mz.122-33.SXH1.bin on the same platform as the one I got. This Bin file is about 33mb and stored on the sup-bootflash.

The unit I have has 1 GB on the SP and 1GB on the RP. No CFM on disk0 or 1.

The unit is able to boot up with s72033-ps-mz.122-18.SXD7b.bin, Also I ran the full diagnostic on all modules and they were all passed.

s72033-boot-mz.122-33.SXH1.bin is a boot image. I tried to load this and it could not go beyond uncompressing the bin image. It actually stuck in the boot up process without going to my next boot system statement. I had to use rommon to change the boot config to get this unit booting again.

Thanks.

3 REPLIES
New Member

Re: 6509 Sup720 3BXL can not load bootimage 122-33.SXH1

The new version of Cisco IOS also requires a firmware upgrade of the DFC

modules already installed. An overview is that you have to download and

then install it on each module with:

upgrade rom-monitor slot 4 file bootflash:c2lc-rm2.srec.122-18r.S1

and then reboot the card. Detailed instructions are below:

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/rommon

/OL_6143.html

New Member

Re: 6509 Sup720 3BXL can not load bootimage 122-33.SXH1

Thanks for replying,

I do not have any DFC on this unit. I have already upgraded the latest firmware for the Sup720 SP and RP and also the WS-X6724-SFP firmware is upgraded to the latest. Could there be some other reason ?

Here is the show module version

Mod Port Model Serial # Versions

--- ---- ------------------ ----------- --------------------------------------

3 48 WS-X6348-RJ-45 SAL05052XVE Hw : 1.5

Fw : 5.4(2)

Sw : 8.3(0.156)ROC20

4 48 WS-X6348-RJ-45 SAL050969H9 Hw : 2.0

Fw : 5.4(2)

Sw : 8.3(0.156)ROC20

5 2 WS-SUP720-3BXL SAD08320G15 Hw : 4.6

Fw : 8.5(2)

Sw : 12.2(18)SXD7b

Sw1: 8.4(0.61)RCC10

WS-SUP720 SAL1052CGW3 Hw : 2.6

Fw : 12.2(17r)SX5

Sw : 12.2(18)SXD7b

WS-F6K-PFC3BXL SAL09326X6T Hw : 1.6

7 24 WS-X6724-SFP SAD093907X7 Hw : 2.3

Fw : 12.2(18r)S1

Sw : 12.2(18)SXD7b

Sw1: 8.4(0.61)RCC10

WS-F6700-CFC SAD094104TD Hw : 2.0

New Member

Re: 6509 Sup720 3BXL can not load bootimage 122-33.SXH1

correction to the symptom of the problem as stated above, when loading either s72033-boot-mz.122-33.SXH.bin or s72033-boot-mz.122-33.SXH1.bin bootimage, the unit will keep loop in searching for another sup module in another slot in addition to slot 5 which is the current slot for the only sup module installed. The only way is to hard reboot the unit to get it restart.

701
Views
0
Helpful
3
Replies