Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6509 - X6148A: FRU-power failed

Chassis: 6509

IOS: 12.2(18)SXF8

The new X6148A-GE-TX card reports:

%C6KPWR-SP-4-DISABLED: power to module in slot 6 set off (FRU-power failed)

The same model card works fine in this slot.

The only difference on the new card is a special-shaped power socket that allows the card to be inserted into slot 5 or 6 only.

Is there a workaround?

Thank you.

2 REPLIES
Hall of Fame Super Silver

Re: 6509 - X6148A: FRU-power failed

Hello Lev,

it looks like there is a specific daughter card for Power over Ethernet

see the following link

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html

the part number is WS-F6K-GE48-AF

it requires 0.18 A@42 V

Hope to help

Giuseppe

New Member

Re: 6509 - X6148A: FRU-power failed

Thanks for the reply.

The PoE is not an issue as I don't have WS-F6K-GE48-AF daughter card on the X6148A-GE-TX.

411
Views
0
Helpful
2
Replies