I have a new 6509E with 2 sup 2T cards. The 10GE ports on both sup cards will connect to 2 5548s. Can i connect the management interface on the new 6509E to the old 6509 until i free up space to bring the line cards over?
When putting a device like this on the network for initial configuration, I usually grab a pair of SFPs and a piece of fiber and connect them that way. Put a /30 IP address on each side of the interface, add routing if necessary so you can SSH over to the device.
I wish they put a usable copper interface on the sup module, but not really. The easiest thing to do is grab a pair of SFPs and use the included SFP ports. Otherwise you'll have to free up a 10GBE interface just to put it on the network and upgrade/etc...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.