Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

6513 Log messages

Hi all,

I am getting some odd messages on the switch logs & log server. Pls see below sample. Does anyone know what they mean?.

TiIsrSpanCo 1

TiIsrPktCon 40

TitanIsrMainHandler C38

TiIsrMETDec 3

TiIsrPktPay 1

TiIsrSpanCo 1

TiIsrPktCon 40

TitanIsrMainHandler C38

TiIsrMETDec 3

TiIsrPktPay 1

TiIsrSpanCo 1

TiIsrPktCon 40

TitanIsrMainHandler C38

TiIsrMETDec 3

TiIsrPktPay 1

TiIsrSpanCo 1

TiIsrPktCon 40

TitanIsrMainHandler C38

TiIsrMETDec 3

TiIsrPktPay 1

TiIsrSpanCo 1

TiIsrPktCon 40

TitanIsrMainHandler C38

TiIsrMETDec 3

Rgds.

Harry

5 REPLIES
Hall of Fame Super Silver

Re: 6513 Log messages

Hello Harry,

these messages are likely coming from some ASIC named Titan

I had a similar issue some times ago and we solved opening a case: with an IOS upgrade the problem was solved.

Open a Service Request you can have a faulty hardware or the current IOS doesn't support correctly some linecards

do you see all modules ok in sh module ?

Hope to help

Giuseppe

New Member

Re: 6513 Log messages

Hi Giuseppe,

Thanx for your response.....sh mod does show all linecards, IOS 12.1.23E.

I have two 6513's the other box has no Tiatan erors.

Rgds.

Harry.

Re: 6513 Log messages

One of them either has debug on or "service internal" is enabled. It looks like the messages are internal messages. Check you're config on the switch logging the message and look for "service internal", if you see it remove it with "no service internal", if the message is continuous you should be able to verify if removing it made an immediate impact. try it and let us know.

New Member

Re: 6513 Log messages

Hi there,

Thanx for your response....have checked config, no mention of service internal being enabled, how do you check if debug is on?.

Rgds. Sorry, sh debugging comes back with nothing.

Harry

New Member

i have same

i have same issue

TitanIsrMainHandler 38
TiIsrSpanCo 51
TiIsrPktCon 40
TitanIsrMainHandler 38
TiIsrSpanCo 51
TiIsrPktCon 40
TitanIsrMainHandler 38
TiIsrSpanCo 51
TiIsrPktCon 40
TitanIsrMainHandler 38
TiIsrSpanCo 51
TiIsrPktCon 40
TitanIsrMainHandler 38
TiIsrSpanCo 41
TiIsrPktCon 40
TitanIsrMainHandler 38
TiIsrSpanCo 51
TiIsrPktCon 40

do any  one found any solution of this ?.

353
Views
0
Helpful
5
Replies