It appears, from info on the software center, that the rommon version should currently be 12.2(17r)SX5. This is apparently resident on the MSFC3 and considered Fw.
The software center doesn't have firmware images on anything.
It also appears that an IOS boot image is just the current IOS image without line card support. It would be an optional bootable image.
I am still looking into where you would find a firmware image to use to "upgrade" the sp of the 720 blade. When you do a show rom-monitor slot 7 rp, you see that you are currently running ROMMON from the F1 region. There is also the command sh rom-monitor slot 7 sp, which says that you are currently running ROMMON from S (Gold) region. Do I need to upgrade the sp ROMMON?
There is such a thing as an IOS Field Programable Device in the software center. "IOS Field Programmable Devices" under the switches/6513/720-MSFC3 catagory.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...