Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

6513 with Sup 720 : Modules support in Slot#1-->6

Hi,

What (10/100/1000 Ethernet modules supports in slots 1-->6 on 6513 with Sup720. Iam aware that WS-X6748-GE-TX is not supported.

Thank you in advance

MS

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: 6513 with Sup 720 : Modules support in Slot#1-->6

MS

CEF 720 modules are not supported in slots 1 - 6.

CEF 256 modules are supported in slots 1 - 6. So Table 4 and 5 contain modules that are supported in slots 1 - 6.

Edit - have a look at Table 2. It states CEF 256 modules are supported in any slot.

Apologies for the confusion.

Jon

5 REPLIES
Hall of Fame Super Blue

Re: 6513 with Sup 720 : Modules support in Slot#1-->6

MS

Slots 9 - 13 on the 6513 chassis provide dual connections to the switch fabric. So generally speaking any 6500 CEF 720 interface modules cannot be placed in slots 1 - 6 as they need dual connections although note there are exceptions such as the WS-X6724-SFP module which only has a single 20Gbps connection to the switch fabric and can therefore go in any slot.

Jon

Re: 6513 with Sup 720 : Modules support in Slot#1-->6

Hi Jon,

Thank you for the reply. So apart from WS-X6724-SFP , are there any toehr 10/100/1000 Ethernet modules that can go in 1->6?

Thnak you

MS

Hall of Fame Super Blue

Re: 6513 with Sup 720 : Modules support in Slot#1-->6

MS

Yes, most of them. See this attached link, you need to look at Table 4 and Table 5. Any module in these tables will go into any slot in the 6513 chassis -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd8017376e.html

Jon

Re: 6513 with Sup 720 : Modules support in Slot#1-->6

Jon, Thanks again.

I have this link. So...

Table 4. Cisco Express Forwarding 256 10/100 and 10/100/1000 Modules

Per your first reply CEF modules will NOT support (in 1-->6).

Table 5. Classic 10/100 and 10/100/1000 Modules :anything goes in anywhere. is that correct..?

Thank you

MS

Hall of Fame Super Blue

Re: 6513 with Sup 720 : Modules support in Slot#1-->6

MS

CEF 720 modules are not supported in slots 1 - 6.

CEF 256 modules are supported in slots 1 - 6. So Table 4 and 5 contain modules that are supported in slots 1 - 6.

Edit - have a look at Table 2. It states CEF 256 modules are supported in any slot.

Apologies for the confusion.

Jon

456
Views
0
Helpful
5
Replies