Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

6880 with VSS;

 Are there any preferred Ports for the VSL Links between two 6880 Chassis? Thanx for any Help

Everyone's tags (1)
3 REPLIES
Cisco Employee

virtual Switching link can be

virtual Switching link can be configured on both 1-Gigabit and 10-Gigabit port.

Pls check this link

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_chapter_01.html

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6880-x-switch/white_paper_c11-728540.htm

Regards,

Naveen

****rate if it is helpful****

New Member

Thank you Naveenbut I mean

Thank you Naveen

but I mean the Port Number 1-16, Can I use One Or two of this 16 Ports Or can I use only Port 1 and 2 äs VSL Links

regards Thomas

Cisco Employee

it better configure on ten

it better configure on ten gig link te5/15-16 ports.

Regards,

Naveen

****rate if it is helpful****

449
Views
5
Helpful
3
Replies
CreatePlease login to create content