7200 Connecting to Router through modem & AUX port but cannot type
I am having trouble connecting to a Cisco 7201 by the AUX port with a modem. The modem is a US Robotics 56K plugged into AUX port and I am dialing into the modem. It connects and then I am prompted with our banner and login prompt but I cannot type anything. After a few seconds it will display some characters that almost look like an initialization string. I have tried lots of different things, including changing speed, autoconfigure types, different modems, different phone lines, etc.
Current config is
line aux 0
exec-timeout 15 0
password 7 *************
modem autoconfigure type usr_sportster
history size 100
I have searched and searched on google and came across some that have had similar issues with 7201 but never any fixes. We probably have close to a hundred 2600, 2800, 3700, and 3800 that do not have this issue. We only have 2 7201s and they both have the same issue.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...