Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

7200 router with BRI interfaces

Dear Sir,

i have a cisco 7204 Router with 7200-NPE-G2, and i want to install 2 BRI intrfaces on it to provide backup connections, i want to know what is the interfaces that can installed on this router to brovide BRI connections

Thanks

3 REPLIES
Silver

Re: 7200 router with BRI interfaces

Hi,

The PA-8B-ST port adapter provides up to eight S/T-type BRI interfaces used to connect to an ISDN WAN through an external Network Termination 1 (NT1) device.

The PA-4B-U provides up to four BRI interfaces used to connect to an ISDN WAN through its internal NTI device.

Each PA-8B-ST and PA-4B-U interface consists of two bearer (B) channels that can transmit and receive data at the rate of 64 kbps, full-duplex, and one data (D) channel that can transmit and receive data at the rate of 16 kbps, full-duplex. The interfaces use an RJ-45 receptacle and standard straight-through twisted-pair cable.

Rate if it does,

Rgs.

New Member

Re: 7200 router with BRI interfaces

dear balajitvk

Thank you, but the problem is that i cant find these modules(PA-8B-ST and PA-4B-U) when i work on the dynamic configuration tool

Thanks

New Member

Re: 7200 router with BRI interfaces

dear sir,

an error appear in the configuration tool dectate that the NPE-G2 is not compatible with PA-8B-ST, so what i can do in this situation

Thanks

118
Views
0
Helpful
3
Replies
CreatePlease to create content