04-16-2009 05:52 AM - edited 03-06-2019 05:12 AM
is the nvram in NPE-400 or on the I/O controller in 7200 Vxr router
04-16-2009 06:58 AM
Hello Vaibhav,
if you are planning to upgrade to NPE-G1 or better you need to backup the config file.
see
http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/npe-g1_read_me/14025R.html#wp29664
in older processors they look for NVRAM on I/O controllers but NPE-G1 can work without an I/O controller so it has its own NVRAM
So the config file should be on I/O controller with an NPE 400
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community