Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7609 supengine32 active/standby issue

Dear all,

I have 7609 router with two sup engines. The LAN uplink is connected to ports 5/9 and 6/9. when the active port 5/9 fails (cable unplugged), the backup port 6/9 didnt take over. Is this normal, or I need to do some configuration.

Regards

2 REPLIES
Silver

Re: 7609 supengine32 active/standby issue

I think slot 2 can contain an additional redundant supervisor engine, which can act as a backup if the first supervisor engine fails. If a redundant supervisor engine is not required, slot 2 is available for an OSM or other supported Catalyst 6000 family modules.

http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_guide_chapter09186a008007e042.html#wp1048235

Cisco Employee
135
Views
0
Helpful
2
Replies