Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

7613 Temperature

Hi everyone

Could you tell me about limited temperature?

Because, we are using 7613Router but when i issued command 'sh envi' , i did not understand enough about the message.

So, What is the recommend temperature in 7613 from Cisco and if the temperature go to upper than recommend rate what happend and how should it does?

One more thing, if it checked module #1, which one is the most thigs?

For example, it must check inlet temperature or outlet temperature? and what is the inlet/outlet ?

show environment

VTT 1:

VTT 1 OK: OK

VTT 1 outlet temperature: 29C

VTT 2:

VTT 2 OK: OK

VTT 2 outlet temperature: 33C

VTT 3:

VTT 3 OK: OK

VTT 3 outlet temperature: 31C

module 1:

module 1 power-output-fail: OK

module 1 outlet temperature: 44C

module 1 inlet temperature: 28C

module 1 device-1 temperature: 26C

module 1 device-2 temperature: 26C

module 2:

module 2 power-output-fail: OK

module 2 outlet temperature: 41C

module 2 inlet temperature: 27C

module 2 device-1 temperature: 25C

module 2 device-2 temperature: 26C

Please, explain for me ^^

Thank you!

280
Views
0
Helpful
0
Replies
CreatePlease to create content