Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

802.1x Mac Authentication Bypass

Hello

When i configure 802.1X with Vlan assignement, and mac authentication bypass not activate, the port go to VLAN Guest when the PC is shutdown

However, yhen you configure 802.1 with vlan assignement and Mac authentication bypass activate, when the PC is shutdown, the port don't go to VLAN Guest ou auth Fail Vlan if its configure

Configuration who work:

interface FasEthernet 0/22

switchport mode access

speed 100

duplex full

dot1 port-control auto

dot1x control-direction in

dot1x guest-vlan 200

spanning-tree portfast

end

Configuration i want to work but don't work:

interface FasEthernet 0/22

switchport mode access

speed 100

duplex full

dot1 port-control auto

dot1x control-direction in

dot1x mac-authentication bypass

dot1x guest-vlan 200

spanning-tree portfast

end

to resume, i want when a PC is shutdown, its go to VLAN GUEST or another VLAN that the VLAN of production

This is essentially for Wake On Lan utilisation.

Thanks

1 REPLY
Silver

Re: 802.1x Mac Authentication Bypass

Guest VLAN enables the non-802.1X capable hosts to access the networks that use 802.1X authentication. You can use the guest VLANs while you are upgrading your system to support the 802.1X authentication. Rerer URL

http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00803f5786.html#wp1029898

259
Views
0
Helpful
1
Replies
CreatePlease login to create content