Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

802.1x, switch 3550, radius server

Hi every body!

If i want to configure switch 3550 to use 802.1x with radius server. Are the following steps are correct?

switch(config)# aaa new-model

switch(config)# radius-server host 10.10.10.10 key cisco

switch(config)# aaa authetication dot1x default group radius.

switch(config)#aaa authentication network default group radius

switch(config)# dot1x system-auth-control

switch(config) int f0/1

switch(config-if) dot1x port-control auto

Do we need the command"aaa authentication network default group radius" or not?

thanks a lot!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: 802.1x, switch 3550, radius server

Sarah

"Do we need the command"aaa authentication network default group radius" or not?"

No you don't need it, it is optional if all your are doing is configuring 802.1x. See this link for more details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/sw8021x.html#wp1155289

Jon

1 REPLY
Hall of Fame Super Blue

Re: 802.1x, switch 3550, radius server

Sarah

"Do we need the command"aaa authentication network default group radius" or not?"

No you don't need it, it is optional if all your are doing is configuring 802.1x. See this link for more details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_44_se/configuration/guide/sw8021x.html#wp1155289

Jon

772
Views
0
Helpful
1
Replies