Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Silver

802.1x test

i am trying to get the 802.1x authentication working between windows xp computer and switch c3560 using ACS 3.2.

ip address is static in this first step, just trying to be authenticated by radius ietf.

but in acs i got this error in Failed Attempts :

Bad request from NAS .. .. .. Invalid message authenticator in EAP request.

really can't see what is the reason.

database is local in acs.

atteched is my config in switch and debug dot1x packets.

thanks for help

1 REPLY
Cisco Employee

Re: 802.1x test

Your config seems to be fine and you are missing just one command. Please try to setup the command " ip radius source-interface Vlan1 " and check if that works.

HTH, Please rate if it does.

-amit singh

135
Views
0
Helpful
1
Replies