Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

802.1x with 2948 Ge tx

Dear all,

i got the strange task to implement 802.1x with 2948 ge tx switches. I configured a lab.

my problem i get back the information of microsoft ias which i use:

A malformed Radius Message was received from client 2948-SW...The data is the RADIUS message.

Has anyone an ide what the problem could be?

I work with dynamic vlan assignement..

best regards,

Sebastian

1 REPLY
New Member

Re: 802.1x with 2948 Ge tx

Well if it knows the client name, it isn't a bad secret key.

There are a lot of options controlling the content of radius messages on the switch. I do not use IAS, but this was a working configuration for me the last time I played with it.

radius-server attribute 8 include-in-access-req

radius-server attribute 32 include-in-access-req

radius-server attribute 25 access-request include

radius-server attribute 61 extended

radius-server attribute 31 mac format ietf

radius-server vsa send accounting

radius-server vsa send authentication

204
Views
2
Helpful
1
Replies