802.1x

[carl_townshend]

Hi all, how would I configure my switches with this?

[mheusinger]

Hi Carl,

have a look at "Access Control Design Guide"

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns251/c649/ccmigration_09186a00806805d6.pdf

Or have a look at the configuration guide for your particular switch and IOS version. There is a section describing 802.1x

Hope this helps!

Regards, Martin

[Amit Singh]

Carl,

Check this link out and with the help of this link you will be able to configure 802.1x on your switches.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225se/3560scg/sw8021x.htm

HTH,

-amit singh