Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

827 router problem

Hi all,

I have  cisco router 827 and it is working that have interface ethernet0 which workes on 10M/half duplex and the problem i configure it to 100M/Full duplex.

Note that the system software is (C820-K9OSY6-M), Version 12.3(26)

Thanks

5 REPLIES
New Member

827 router problem

Hi all,

I have  cisco  router 827 which has one interface  ethernet0 workes  on 10M/half duplex and the problem i cant configure it to 100M/Full duplex.

Note that the system software is (C820-K9OSY6-M), Version 12.3(26)

Thanks

Bronze

827 router problem

Hi,

it depends on what is on the oposite side of your router and then decide if you can configure your interface to 100M/full duplex.

If you configure ethernet0 to duplex auto and speed auto so what is result?

Regards,

Jan

New Member

827 router problem

thanks Jan ,
there is no speed or duplex commands under (interface ethernet 0) ,is it posssible

Bronze

827 router problem

Hi,

regarding of the software version it would be possible. But regarding of hardware i think it is not. So if you want to use greater speed you will have to replace your current router with newer model.

Regards,

Jan

New Member

827 router problem

Thanks Jan for your help

112
Views
0
Helpful
5
Replies
CreatePlease to create content