Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

857W Port forwarding to 2 FTP servers

Hi,

I have commands below to perform port forwarding for FTP:

ip nat inside source static tcp 10.10.10.24 20 interface Dialer0 20

ip nat inside source static tcp 10.10.10.24 21 interface Dialer0 21

But I would like to perform a port forward to another FTP server also.

Users would say target port 7000 so I would need to add the following line.

ip nat inside source static tcp 10.10.10.25 21 interface Dialer0 7000

My question is - what (outside) port do I map for control/data (which is traditionally port 20)?

1 REPLY

Re: 857W Port forwarding to 2 FTP servers

Hi, You can do that.

I make some test but it is not posible.

116
Views
5
Helpful
1
Replies