887W IOS 15.2 posted images are c880voice not c880data
The posted IOS 15.2 images for the Cisco 887W router are of the type c880voice and not c880data although the router does not have voice capabilities and therefore such an image is not appropriate. Other routers of the 880 family have c880data images available for download but not the 887W one.
Can someone from Cisco please look into this?
Can I download a c880data image posted for another router and use it for the 887W?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...