cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
966
Views
0
Helpful
2
Replies

a pair of CISCO7609-s switchover their engine in 30Min

zhuch
Level 1
Level 1

I have two CISCO7609-s configured as pairs, everyone has two Sup32 engine(IOS Version 12.2(33)SRD4),both of them switchover engine yestoday afternoon. One have two crash files,slavesup-bootdisk: crashinfo_20120229-192447-UTC+8 and slavebootflash: crashinfo_20120229-192447-UTC+8,the other only find one crash file,slavebootflash: crashinfo_20120229-195748-UTC+8.

Following is part of the crash files:

CE07 slavesup-bootdisk:crashinfo_20120229-192447-UTC+8

Jan  9 02:12:52.377: %LINEPROTO-SP-5-UPDOWN: Line protocol on Interface GigabitEthernet1/21, changed state to up
Feb  9 00:35:44.721: %C6KPWR-SP-4-DISABLED: power to module in slot 9 set off (admin request)

19:24:47 UTC+8 Wed Feb 29 2012: Address Error (load or instruction fetch) exception, CPU signal 10, PC = 0x403AC83C

--------------------------------------------------------------------
   Possible software fault. Upon recurrence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 403AC83C 404AB748 40822798 406C349C 406C38DC
$0 : 00000000, AT : 421A0000, v0 : 00FF0000, v1 : 540EC0EC
a0 : 4435EB68, a1 : 00000000, a2 : 0B0D0B0D, a3 : 44F61B3F
t0 : 43AE8B58, t1 : 43AE8B50, t2 : 3400F100, t3 : FFFF00FF
t4 : 40D455A8, t5 : 5C3CCAE8, t6 : 00000000, t7 : 0000003C
--More--                          
s0 : 5C009834, s1 : 48254930, s2 : 5C009834, s3 : 500E7114
s4 : 00000038, s5 : 50CF618C, s6 : 00000001, s7 : 434D0000
t8 : 0D0D0D0D, t9 : 00000000, k0 : 45FE22B4, k1 : 404A8E68
gp : 421AAA70, sp : 443191E0, s8 : 43B10000, ra : 403AC828
EPC  : 403AC83C, ErrorEPC : 404C0E78, SREG     : 3400FD03
MDLO : 00000000, MDHI     : 00000038, BadVaddr : 0B0D0B11
DATA_START : 0x41EAB3D0
Cause 00000010 (Code 0x4): Address Error (load or instruction fetch) exception


========= Start of Crashinfo Collection (19:24:47 UTC+8 Wed Feb 29 2012) =======
For image:
Cisco IOS Software, c7600s3223_sp Software (c7600s3223_sp-ADVIPSERVICES-M), Version 12.2(33)SRD4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Feb-10 03:02 by prod_rel_team

CE07 slavebootflash: crashinfo_20120229-192447-UTC+8

CMD: 'sh inter desc | in 80E' 16:47:47 UTC+8 Wed Feb 29 2012
--More--                          
CMD: 'sh modu' 16:47:51 UTC+8 Wed Feb 29 2012
CMD: 'sh module ' 16:47:51 UTC+8 Wed Feb 29 2012
CMD: 'q' 16:48:29 UTC+8 Wed Feb 29 2012

Feb 29 19:24:47.139: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [6/0]

%Software-forced reload


19:24:47 UTC+8 Wed Feb 29 2012: Breakpoint exception, CPU signal 23, PC = 0x42A89530

--------------------------------------------------------------------
   Possible software fault. Upon recurrence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 42A89530 42A87098 427A5BC4 427A5BF0 4265847C 42697924 42697980 409E8298 409E9570 409EA404 4255761C 42B34668 42B26FA8 42B271C4 42A7BA5C
--More--                          
$0 : 00000000, AT : 1E020000, v0 : 45C50000, v1 : 00000030
a0 : 469A486C, a1 : 00000004, a2 : FFFFFFFC, a3 : 00000002
t0 : 0000001D, t1 : 00000000, t2 : 0000016D, t3 : 00000003
t4 : 5000DB58, t5 : 00000000, t6 : 000110FF, t7 : 5000DB50
s0 : 00000000, s1 : 44000000, s2 : 50698504, s3 : 087D75E8
s4 : 487A419C, s5 : 487A43D4, s6 : 50698504, s7 : 452E0000
t8 : 5000DB34, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 440D1CC8, sp : 5000DBD0, s8 : 087D75C8, ra : 42A87098
EPC  : 42A89530, ErrorEPC : 40E7DF3C, SREG     : 3401F103
MDLO : 999999BB, MDHI     : 00000085, BadVaddr : 6EE4ED9F
CacheErr : E0800000, DErrAddr0 : 1E02000C, DErrAddr1 : 8170B7B0
DATA_START : 0x43B34A10
Cause 00000824 (Code 0x9): Breakpoint exception

CE08 slavebootflash: crashinfo_20120229-195748-UTC+8

Feb 29 19:25:04.751: %OSPF-5-ADJCHG: Process 1, Nbr 10.1.74.206 on Vlan20 from LOADING to FULL, Loading Done
--More--                           Feb 29 19:25:04.759: %OSPF-5-ADJCHG: Process 2, Nbr 10.1.74.202 on Vlan10 from LOADING to FULL, Loading DoneCMD: 'sh modu' 19:31:51 UTC+8 Wed Feb 29 2012
CMD: 'sh module ' 19:31:52 UTC+8 Wed Feb 29 2012
CMD: 'q' 19:44:29 UTC+8 Wed Feb 29 2012

Feb 29 19:57:48.349: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [6/0]

%Software-forced reload


19:57:48 UTC+8 Wed Feb 29 2012: Breakpoint exception, CPU signal 23, PC = 0x42A89530

--------------------------------------------------------------------
   Possible software fault. Upon recurrence, please collect
   crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------


-Traceback= 42A89530 42A87098 427A5BC4 427A5BF0 4265847C 42697924 42697980 409E8298 409E9570 409EA404 4255761C 42B34668 42B26FA8 42B271C4 42A7BA5C
--More--                          
$0 : 00000000, AT : 1E020000, v0 : 45C50000, v1 : 00000050
a0 : 46B5B710, a1 : 00000004, a2 : FFFFFFFC, a3 : 00000002
t0 : 0000001D, t1 : 00000000, t2 : 0000016D, t3 : 00000003
t4 : 5000DB58, t5 : 00000000, t6 : 000118BC, t7 : 5000DB50
s0 : 00000000, s1 : 44000000, s2 : 465FAD28, s3 : 087D8AE8
s4 : 516A885C, s5 : 516A8A94, s6 : 465FAD28, s7 : 452F0000
t8 : 5000DB34, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 440D24A8, sp : 5000DBD0, s8 : 087D8AC8, ra : 42A87098
EPC  : 42A89530, ErrorEPC : 4260F0C0, SREG     : 3401F103
MDLO : 999999E5, MDHI     : 0000012D, BadVaddr : F3FFFDCF
CacheErr : A0800000, DErrAddr0 : 1E02000C, DErrAddr1 : 8000DB18
DATA_START : 0x43B351F0
Cause 00000824 (Code 0x9): Breakpoint exception


========= Start of Crashinfo Collection (19:57:48 UTC+8 Wed Feb 29 2012) =======
For image:
Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVIPSERVICES-M), Version 12.2(33)SRD4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Mon 22-Feb-10 02:57 by prod_rel_team
--More--

I think this problem is caused by IOS Bug,but i          don't find the approach case use Bug Tool .               

1 Accepted Solution

Accepted Solutions

phiharri
Level 1
Level 1

Greetings,

Based on the crashinfo this looks to be CSCsk48102 (Crash in buffer allocation). It's quite a rare issue, and fixed in SRD5 and later.

HTH,

/Phil

View solution in original post

2 Replies 2

phiharri
Level 1
Level 1

Greetings,

Based on the crashinfo this looks to be CSCsk48102 (Crash in buffer allocation). It's quite a rare issue, and fixed in SRD5 and later.

HTH,

/Phil

Thank you, I will try to upgrade IOS.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco