I have a big problem ,the module WS-X6348-RJ-45 is not working on my core switch 6509 , the port can't forword the packet ,and I reload the switch ,so all ports on module 6348 is orange ,and display errdisable.
Please tell me what is the real fault on the module ,thanks.
The error displayed as "Coil Packet Buffer Error" gives an indication of hardware failure. But before getting it replaced can you try reseating the card in some other slot and if you get same error in "sh test" then get it replaced.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...