Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

aaa authentication banner not showing in ssh via putty

Hello,

I have setup my routers to authenticate via radius, but I need to display a message when user connect to a switch or router when using SSH that radius is online so they know not to use the local passwords.  Anyway it doesnt work for ssh, if I login in with telnet it does, I need them to work securely.

Can anyone shed some light on this?

Thanks

4 REPLIES

aaa authentication banner not showing in ssh via putty

Can you post your banner config? If you set it up for a login it should work. What type of device is this?

HTH, John *** Please rate all useful posts ***
New Member

Re: aaa authentication banner not showing in ssh via putty

I'm test on a 1841, but will also need to do it on a few 3750's and 2960's.

I don't think it can be done:

https://supportforums.cisco.com/docs/DOC-3661

All I did was something like "aaa authentication banner $ text $"

Works for telnet.

Thanks

Re: aaa authentication banner not showing in ssh via putty

Would banner login $ test $ work for you?

HTH, John *** Please rate all useful posts ***
New Member

Re: aaa authentication banner not showing in ssh via putty

Well I need to have a banner for when radius is working so it says somehting like "Radius authentication online" and shoud lit be down then it fails back to the local database and says something like "Local authenticaion only, Radius down".

But I'm not sure this is possible, do you?

1448
Views
0
Helpful
4
Replies