Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

aaa configration

hello we have ACS server in our network which is currently used for wireless controllers we need to add network switches to authenticate from ACS server.

I have prepaired some config but  I am not sure if thats right I have two set of config do tell if any of the 2 is correct or any changes are required .

1)

aaa group server tacacs+ AAAGROUP_TACACS

server-private 10.1.2.1 key 0 abcd

server-private 10.1.2.2 key 0 abcd

ip tacacs source-interface Vlan2

2)

aaa new-model

aaa authentication login WestAuthList group radius local

radius-server host 10.1.2.1 auth-port 1645 acct-port 1646 key abcd

radius-server host 10.1.2.2 auth-port 1645 acct-port 1646 key abcd

ip radius source-interface Vlan2

line vty 0 4

login authentication WestAuthList

transport input ssh

thanks for help

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

aaa configration

Hi,

second config is correct for authentication.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
1 REPLY
Purple

aaa configration

Hi,

second config is correct for authentication.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
53
Views
0
Helpful
1
Replies
CreatePlease login to create content