04-19-2012 12:23 PM - edited 03-07-2019 06:14 AM
Hello Support Community;
Is there a way to configure aaa for vty lines and not async lines? Our vty lines are used for Network admins to access the routers. Our async lines (line 0/0/0 to 0/0/15) are used for RS-232 devices. They are also access via reverse telnet connections. I don't want to be asked for passwords.
Thank You
Sean B.
Solved! Go to Solution.
04-19-2012 01:03 PM
Hi Sean ,
You could configure the default authentication as wanted for general use ( ssh/telnet ), and configure a list that does not require any authentication :
aaa authentication login default group tacacs local
aaa authentication login ASYNC none
line x y
login authen ASYNC
Dan
04-19-2012 01:03 PM
Hi Sean ,
You could configure the default authentication as wanted for general use ( ssh/telnet ), and configure a list that does not require any authentication :
aaa authentication login default group tacacs local
aaa authentication login ASYNC none
line x y
login authen ASYNC
Dan
04-20-2012 06:18 AM
Hello Dan;
Thank you for the answer.
Sean
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: