cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
547
Views
0
Helpful
1
Replies

About Port Mirroring on C6509

shsong21
Level 1
Level 1

I have one question about Port mirroring on C6509 with CatOS.

I wanna mirroring Mulit vlan with port mirroring command.

How do i configure it ?

I means all vlans I have.

I need ur help.

Regards,

1 Accepted Solution

Accepted Solutions

nordick26
Level 1
Level 1

Hi,

it should be quite straight forward.

Just need this command

set span "Source_VLAN_Number" "Destination_Port_Number"

I you have a range of VLANs, you can use this format:

set span 1-20 1/1

To verify your config, you can use:

show span

command.

HTH

Ivan

[please rate any helpful posts]

View solution in original post

1 Reply 1

nordick26
Level 1
Level 1

Hi,

it should be quite straight forward.

Just need this command

set span "Source_VLAN_Number" "Destination_Port_Number"

I you have a range of VLANs, you can use this format:

set span 1-20 1/1

To verify your config, you can use:

show span

command.

HTH

Ivan

[please rate any helpful posts]

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: