12-08-2006 03:36 AM - edited 03-05-2019 01:15 PM
Dear Sirs,
IOS improves to 12.1(27b)e in the version by "Sup1A + MSFC2" With Cat6506.
At that time, is it unquestionable for CatOS like 5.5(1)?
Best regards,
12-08-2006 03:43 AM
Hi Hsasaki,
Can you be more clear about your question?
Ankur
12-10-2006 05:37 PM
Hi Ankur,
I'm sorry English ..not good...
Current state
Supervisor Engine: WS-X6K-SUP1A-2GE
Supervisor Software: 5.5(1)
MSFC: WS-F6K-MSFC2
IOS: 12.1(2)e
I want to improve IOS to 12.1(27b)E in the version.
At that time, is not the necessity in an increase in the memory?
Best regards,
12-10-2006 09:56 PM
Hi Hsasaki,
If you are only trying to upgrade the image on MSFC from 12.1(2)e to 12.1(27b)E the recommended DRAM and FLASH is 64 MB DRAM and 16 MB Flash which I belive your MSFC must be having so no need to upgrade memory.
Can you confirm if you want to just upgrade the image on MSFC or you want to convert full supervisor from CATOS to NATIVE IOS?
Ankur
12-11-2006 05:28 AM
Hi,
To understand the real DRAM / NVRAM in your system may I request you to paste the output from the sh ver please.
Regards,
Wilson Samuel
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: