Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

about Sup1A + MSFC2

Dear Sirs,

IOS improves to 12.1(27b)e in the version by "Sup1A + MSFC2" With Cat6506.

At that time, is it unquestionable for CatOS like 5.5(1)?

Best regards,

4 REPLIES
Cisco Employee

Re: about Sup1A + MSFC2

Hi Hsasaki,

Can you be more clear about your question?

Ankur

New Member

Re: about Sup1A + MSFC2

Hi Ankur,

I'm sorry English ..not good...

Current state

Supervisor Engine: WS-X6K-SUP1A-2GE

Supervisor Software: 5.5(1)

MSFC: WS-F6K-MSFC2

IOS: 12.1(2)e

I want to improve IOS to 12.1(27b)E in the version.

At that time, is not the necessity in an increase in the memory?

Best regards,

Cisco Employee

Re: about Sup1A + MSFC2

Hi Hsasaki,

If you are only trying to upgrade the image on MSFC from 12.1(2)e to 12.1(27b)E the recommended DRAM and FLASH is 64 MB DRAM and 16 MB Flash which I belive your MSFC must be having so no need to upgrade memory.

Can you confirm if you want to just upgrade the image on MSFC or you want to convert full supervisor from CATOS to NATIVE IOS?

Ankur

Re: about Sup1A + MSFC2

Hi,

To understand the real DRAM / NVRAM in your system may I request you to paste the output from the sh ver please.

Regards,

Wilson Samuel

126
Views
5
Helpful
4
Replies
CreatePlease login to create content