Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Access-list in Cisco 3500 Series XL Switch

Hi,

Can somebody help me how to implement access-list in 3500 Series XL Switch. If you have link for guides on this one it would be appreciated.

Thanks,

John

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Access-list in Cisco 3500 Series XL Switch

Hi John,

The 3500XL is purely a layer 2 switch and won't support ACL.

5 REPLIES
Hall of Fame Super Gold

Re: Access-list in Cisco 3500 Series XL Switch

Hi John,

The 3500XL is purely a layer 2 switch and won't support ACL.

New Member

Re: Access-list in Cisco 3500 Series XL Switch

Hi leolaohoo,

Thanks for the reply. But how come I can issues access-list commands in the switch?

Hope you point me in the right direction.

Thanks,

John

Re: Access-list in Cisco 3500 Series XL Switch

The command is there because of catOS, but the hardware does not support it

Re: Access-list in Cisco 3500 Series XL Switch

3500 XL is only a layer-2 switch and does not have a layer-3

functionality. That implies that 3500 XL switches do not support the configuring of ACLs.

The only option is to suppress or control mac-addresses on ports is called Port Security.

Basically with this feature you will allow or restrict certain

mac-addresses or a maximum amount on a per-port-basis.

Here is the config guide for port-security:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc3/swg/Swgports.html

3550 switches, do support ACL :

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_4_ea1/configuration/guide/Swacl.html

New Member

Re: Access-list in Cisco 3500 Series XL Switch

Thanks for you replies guys. It help me understand my concern.

Regards,

John

1282
Views
4
Helpful
5
Replies
CreatePlease to create content