access-list logging rate-limited or missed XXXX packets on 3560G

[rabih_saleh]

Hi,

I'm looking for help as I'm getting this error message on syslog server (Kiwi syslog)

access-list logging rate-limited or missed XXXX packets

i did the following commands but still I'm getting the error :
logging buffered 16386 debugging
logging rate-limit all 5000
no logging console
no logging monitor
ip access-list logging interval 30000
ip access-list log-update threshold 30000

i don't want to report to the console or monitor i want to report direct to syslog server, because I'm monitoring all the traffic (permit ip any any log) !

Thanks for your help,

Rabih

[nkarpysh]

You hav esyslog ratelmiting configured:

logging rate-limit all 5000

It is doing its job. You can try tuning paparameters to get better loggin on syslog server.

Nik

[rabih_saleh]

Hi Nik,

Thanks for your support, please can you help me on parameteres as i already added the command:

logging rate-limit all 5000 but still i'm getting this error:

access-list logging rate-limited or missed XXXX packets

Thanks,

Rabih