Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Access-list question

If I create an access-list as followed:

 

access-list SOMETHING extended permit tcp 10.10.10.0 255.255.255.0 host 172.16.0.1 eq ldap

 

Does ldap only equal 389 or does it also include 636?

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

389 for standard LDAP

636 for non-standard LDAPS (secure LDAP or LDAP over SSL)

2 REPLIES
VIP Super Bronze

I think, it covers 389 only,

I think, it covers 389 only, as 636 is for secure LDAP.

HTH

Super Bronze

DisclaimerThe Author of this

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

389 for standard LDAP

636 for non-standard LDAPS (secure LDAP or LDAP over SSL)

40
Views
0
Helpful
2
Replies
CreatePlease to create content