07-01-2007 02:32 AM - edited 03-05-2019 05:03 PM
Here is the senario...
there are 2 access layer switch 1&2 they are connected using access link,on switch1 i have all ports in vlan2 and on switch2 i have all the ports in vlan 10.
will i be able to ping from a system connected to switch1 to system on switch2 the system are in same subnet.
07-01-2007 02:46 AM
Hi,
Although this is a weired setup, but it should work, as the frames are sent untagged on access ports.
HTH,
Mohammed Mahmoud.
07-02-2007 12:32 AM
thanks for the reply..
One more doubt with the access port on both side show up or flap,since they belong to different vlan
07-02-2007 12:51 AM
Hi,
As i told you before although this is a weired setup as it makes no sense to connect 2 switches via access ports, they should be connected via trunk ports (in order to be able to handle all the VLANs between the 2 switches), but it should work as the frames are sent untagged on access ports and this shouldn't have any impact on the ports.
HTH,
Mohammed Mahmoud.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: