Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Access Server 2509

Hi

can anyone help me configure my cisco 2509 as a access server for my home lab

i have 2 2950 switches and 4 routers and an octal cable

what configuration do i enter on the 2509

i know we use the ip hostname command

and config a loopback int with an ip address on the 2509

and use it like this

ip hostname SW1 2001 100.1.1.1

what else do i need to do onthis router or on the other devices in order to make it work without shifting console cables

please advice

Thanks

4 REPLIES
Cisco Employee

Re: Access Server 2509

New Member

Re: Access Server 2509

HI

i appreciate your help

can anybody tell me what is TRANSPORT INPUT/OUTPUT command used for?

Thanks

Silver

Re: Access Server 2509

Hi There

The "Transport Input/Output" command is used to define what protocols are allowed in (input) and out(output) from a particular interface.

If you run the command "transport input ?" or "transport output ?" you will see what protocols are available on that specific interface.

Depending on the IOS version, the "input" option may not be available.

HTH

Best Regards,

Michael

New Member

Re: Access Server 2509

HI

first of all let me thank you for the help

when i configure the 2509 to connect to the pair of switches and routers so that i dont hve to shift console cable i use the transport input all at the LINE 1 8 command

Why do i use INPUT in this command not OUTPUT coz basically the 2509 router is accessing the other devices so connection is going outward.I am a little confused

Please advice

396
Views
0
Helpful
4
Replies
CreatePlease to create content