I and very new to Cisco Devices. I am looking for Cisco Switches and routers. I went through the Cisco's product advisor and these are the devices I identified based on device usage and its capabilities. Can you please help me answer the folling?
1. does the switch/router comes with IOS that supports ssh? if not what additional license or IOS do I need to buy for each?
2. Does the switch come boxed with all the rack accessories, power supplies and power cords?
BTW, I see you list 3560E for user access. These are very high performance (about wire rate) L3 switches and user access often doesn't call for that level of performance. Have you also looked at the non -E 3560 series? Also, unless you're planning L3 to the edge, you might also consider L2 switches.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...