Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Access to Switch from Router neighbor

I have a this topology where the router and switch are neighbors. My goal is to reach the switch through router. Tha useful command is:

My issue is that don't knew how to get the username and the password on the switch.

Router#telnet  10.10.10.2 /source-interface Vlan 7

Routerj#show arp

Protocol  Address          Age (min)  Hardware Addr   Type   Interface

Internet  10.10.10.1              -   70ca.9be0.1a96  ARPA   Vlan7

Internet  10.10.10.2             21   001b.2b23.0945  ARPA   Vlan7     SWITCH

Internet  192.168.168.1           -   70ca.9be0.1a96  ARPA   Vlan1

Internet  192.168.168.2          89   0017.59c0.c240  ARPA   Vlan1

Internet  192.168.170.1           -   70ca.9be0.1a96  ARPA   Vlan2

Router#telnet  10.10.10.2 /source-interface Vlan 7

Trying 10.10.10.2 ... Open

       ######################## Warning #####################################

       ######################## Aviso #######################################

      

User Access Verification

Username:

Password:

Thank you in advance,

http://networkingcontrol.wordpress.com/
#CCNP CSCO11962956       

http://networkingcontrol.wordpress.com/ #CCNP CSCO11962956
1 REPLY
Silver

Access to Switch from Router neighbor

Alfredo,

I think the only way to get into that switch is do a pasword recovery if you are not aware of the username and password.

Thanks

Ankur

92
Views
0
Helpful
1
Replies