we're looking for a solution to do accounting based on dot1q tags only, i.e. there is no access to the switches having the VLAN interfaces, we only have access to the switches transporting these VLAN's and need to know the bandwidth consumption based on the VLAN Tags we see on our trunks.
Preferred Switch: 3750G-12s (or any other switch haveing at least 10 GigE ports based on SFPs
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...