Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACL is on or Off ?

Hello,

How to know if an acl is applied or not(for an interface or route-map...)

Best regards,

1 ACCEPTED SOLUTION

Accepted Solutions

ACL is on or Off ?

You could do something like this:

Router#sh ip int | i is (up|down)|Outgoing|Inbound

FastEthernet0/0 is up, line protocol is up

FastEthernet0/0.290 is up, line protocol is up

  Outgoing access list is not set

  Inbound  access list is not set

FastEthernet0/1 is up, line protocol is up

  Outgoing access list is not set

  Inbound  access list is not set

FastEthernet0/1.150 is up, line protocol is up

  Outgoing access list is not set

  Inbound  access list is not set

Multilink1 is administratively down, line protocol is down

  Outgoing access list is not set

  Inbound  access list is not set

Your list would show up here if it was applied.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
3 REPLIES
New Member

ACL is on or Off ?

without going through "sh run"

ACL is on or Off ?

You could do something like this:

Router#sh ip int | i is (up|down)|Outgoing|Inbound

FastEthernet0/0 is up, line protocol is up

FastEthernet0/0.290 is up, line protocol is up

  Outgoing access list is not set

  Inbound  access list is not set

FastEthernet0/1 is up, line protocol is up

  Outgoing access list is not set

  Inbound  access list is not set

FastEthernet0/1.150 is up, line protocol is up

  Outgoing access list is not set

  Inbound  access list is not set

Multilink1 is administratively down, line protocol is down

  Outgoing access list is not set

  Inbound  access list is not set

Your list would show up here if it was applied.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
New Member

ACL is on or Off ?

Thank you a lot !

108
Views
0
Helpful
3
Replies