10-09-2006 06:58 PM - edited 03-05-2019 12:08 PM
Hi,
I am having a cisco 3750 switch in which 2 vlans are configured.
I make ACL to control packets between 2 nets.
The ACL functions but it does not make log. I installed one syslog server, but the switch don?t make log
Please, anybody can help me?
IOS Version: 12.1.14EA1
Sorry my bad english,
Thank and Regards
Claudio Mota
10-09-2006 08:07 PM
Claudio,
Can we see the switch config ?
10-10-2006 06:10 AM
Hi Claudio,
The ACL are proccessed in hardware and hence you may not see the hitcounts when you issue a show access-lists
If you want to log the access-lists, make sure you include the log statement at the end of the access-list
Eg
access-list 100 permit ip any any log
HTH
Narayan
10-10-2006 11:09 AM
Hi Narayan
Yes, the ACL are processed, but not make log and i placed LOG parameter in the end of ACL.
I go to poste show run result here
10-10-2006 06:08 AM
Hi Claudio
are u fast or process switching ?
Sam
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide