Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACL question

Hi all,

I have one Extended Access list question to ask

if we have 2 pc with ip 5.1.1.8/24  and 5.1.1.10 /24  and we apply this acl on ethernet interface of router

with ip access-group 101 in

here  is acl

access-list 101 deny tcp 5.1.1.8 0.0.0.3 any eq 80

access-list permit ip any any

here we are blocking the internet access for users

my question is are we blocking the single user or all users in the 5.1.1.0 network?

i know when we want to deny single user we can use host or 0.0.0.0  as wilcard masks.

thanks

mahesh

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: ACL question

mahesh18 wrote:

Hi all,

I have one Extended Access list question to ask

if we have 2 pc with ip 5.1.1.8/24  and 5.1.1.10 /24  and we apply this acl on ethernet interface of router

with ip access-group 101 in

here  is acl

access-list 101 deny tcp 5.1.1.8 0.0.0.3 any eq 80

access-list permit ip any any

here we are blocking the internet access for users

my question is are we blocking the single user or all users in the 5.1.1.0 network?

i know when we want to deny single user we can use host or 0.0.0.0  as wilcard masks.

thanks

mahesh

Mahesh

5.1.1.8 0.0.0.3 = hosts 5.1.1.9, 5.1.1.10 & 5.5.1.11

Jon

2 REPLIES
Hall of Fame Super Blue

Re: ACL question

mahesh18 wrote:

Hi all,

I have one Extended Access list question to ask

if we have 2 pc with ip 5.1.1.8/24  and 5.1.1.10 /24  and we apply this acl on ethernet interface of router

with ip access-group 101 in

here  is acl

access-list 101 deny tcp 5.1.1.8 0.0.0.3 any eq 80

access-list permit ip any any

here we are blocking the internet access for users

my question is are we blocking the single user or all users in the 5.1.1.0 network?

i know when we want to deny single user we can use host or 0.0.0.0  as wilcard masks.

thanks

mahesh

Mahesh

5.1.1.8 0.0.0.3 = hosts 5.1.1.9, 5.1.1.10 & 5.5.1.11

Jon

New Member

Re: ACL question

Hi jon

Thanks one more time

regards

mahesh

196
Views
0
Helpful
2
Replies