Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACL replacement on VLAN interface on 4507

my vlan interface 61 had an access-list StopInbound. It worked fine, but had too many logging statements, so it was clogging my buffer. I modified it to remove the loggin statements, and named it StopInbound-nolog. On the vlan interface 61, I removed StopInbound, and replaced it with StopInbound-nolog. But I'm still getting messages from the original ACL. Do I need to bounce the vlan int 61 for the new ACL to take effect? I'm using IOS enterprise 12.2-25.ewa8

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: ACL replacement on VLAN interface on 4507

Can you post the portion of the config where it contains the ACL ?

2 REPLIES
Hall of Fame Super Bronze

Re: ACL replacement on VLAN interface on 4507

Can you post the portion of the config where it contains the ACL ?

New Member

Re: ACL replacement on VLAN interface on 4507

Hi Edison,

Thanks for reply; it looks like the problem fixed itself, as I no longer get log messages from the inactive ACL. The odd thing was that the last message from the de-activated ACL was 4 minutes and six seconds after I removed it, which prompted my question. This morning I cleared ACL-counters, and the deactivated one is no longer taking hits.

133
Views
0
Helpful
2
Replies
CreatePlease to create content