Based on what you have told us one solution would be to configure an access list for each of the SVIs on your 3750 switch and apply it on the inbound direction for the interface. In the access list you would permit packets with source address in the vlan of that interface a destination of the server vlan. You would deny all other traffic. This would allow each vlan to communicate with the server vlan but not with any other vlan.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...