All,
Can you please help with the following I have the following configured on my Nexus switches and works with success.
The problem I have is
Once I switch of the ACS server I can log on to the Nexus as I have a admin user configured locally on the Nexus and the ACS server unfortunately can not run commands as it tries to point to the ACS server for auhtorization and the ACS server is turned off is it possible for the Nexus to ignore the authorization command if it can not see the ACS server ?
Feature tacacs+
ip tacacs source-interface vlan 705
tacacs-server host x.x.x.x key 7 "xxxxxx"
aaa group server tacacs+ Test-switch (Test-switch is a group configured on ACS 5.2)
aaa group server tacacs+ Test-switch
server x.x.x.x
aaa authentication login default group Test-switch
aaa authorization config-commands default group Test-switch
aaa authorization commands default group Test-switch
aaa accounting default group Test-Servers
tacacs-server directed-request
Any help is much appreicated
Many Thanks,
Zee