I have 2 oulets in my Room connected to 3550 Switch(vlan 9) but the Problem is i want to add another 5 computers but no enough Outlet waht am thinking is to Add a d-Link Switch 8 ports to the outlets(connected to access-port on vlan 9.now any exta config on the Access Switch to prevent Storm/brodcasd etc?
Don't worry, as I'm seeing, you are using the switch inline, I mean that there is no loop! so no broadcast storm to prevent. And all computers connected to your new switch will be in the same vlan on the access port on the Cisco switch which is vlan 9.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...