Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Adding a 3750 48ts in an existing stack of 375012ts + 375048ts

I have an existing stack of 375012ts and 375048ts with IOS ver 12.1(19)EA1c among them 375012ts is a master now i have to add an 375048ts with IOS ver 12.2(25)SEE2 so please guide me what steps should i follow.

4 REPLIES
Cisco Employee

Re: Adding a 3750 48ts in an existing stack of 375012ts + 375048

Hello,

Please see the link below and go through it completly. This link will tell you whole things about managing the switch stacks with 3750's.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swstack.htm

HTH,Please rate if it does.

-amit singh

Community Member

Re: Adding a 3750 48ts in an existing stack of 375012ts + 375048

thanks for your reply and will go thru as u suggested.

Community Member

Re: Adding a 3750 48ts in an existing stack of 375012ts + 375048

can you tell me what will be effect of replacing the switch 3750 24ts iso ver. from 12.2(25)SEE2 to 12.1(19)EAic will the switch will support the older iso version.

Cisco Employee

Re: Adding a 3750 48ts in an existing stack of 375012ts + 375048

Upendra,

You can certianly run the older IOS on the switch. But why you want to do that ????

You might loose out some features that you are running on the switch rt now. Please the release notes for the older IOS and check for the features.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12119ea1/ol543002.htm

HTH,

-amit singh

207
Views
5
Helpful
4
Replies
CreatePlease to create content