Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Adding a new switch to 3750 stack

Will I need to shut down the stack to add a new switch?

Thanks!

HTH, John *** Please rate all useful posts ***
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Adding a new switch to 3750 stack

Make sure that the new switch has the same version of IOS as the other switches in the stack. Power off the new switch. Install the stackwise cables as per Cisco specifications. Power on the new switch. The new switch will become a member of the stack, there is no need to reboot the other switches.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.1_14_ea1/configuration/guide/swstack.html

2 REPLIES

Re: Adding a new switch to 3750 stack

Make sure that the new switch has the same version of IOS as the other switches in the stack. Power off the new switch. Install the stackwise cables as per Cisco specifications. Power on the new switch. The new switch will become a member of the stack, there is no need to reboot the other switches.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.1_14_ea1/configuration/guide/swstack.html

Re: Adding a new switch to 3750 stack

Thank you!

HTH, John *** Please rate all useful posts ***
314
Views
0
Helpful
2
Replies
CreatePlease to create content