Adding a Secondary IP Address on a Cisco ASA Ethernet Interface ??

[pprinz001]

I was just wondering if this is possible on a 5505. Please Advise. I need the interface to have traffic to 172.15.51.0 and 172.16.58.0. The interface is set up for 51.0 and I have created access rules for 58.0 but I can only get one way traffic. I was able to work around this on the SA500 and get this working. But the ASA 5505 does not allow for this????

I am stuck.

Thanks

[johnlloyd_13]

Hi,

To my knowledge you can't assign a secondary IP address on an ASA like the way we do on routers.

Why not assign another SVI for the 58.0 or perhaps allow same security level traffic?

Sent from Cisco Technical Support iPhone App

[brownsfan31]

try this. 

http://www.ducea.com/2008/05/31/adding-a-secondary-ip-address-on-a-cisco-asa-ethernet-interface/

Brownsfan74