Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding a VTP transperant switch to Switch domain with all VTP Servers

Hi All,

My cleint has a n/w in which 10switches are set to VTP server mode (VTP not being used for managing them at all). If I add another switch to the same n/w (to core switch via trunk) with VTP mode as 'TRANSPERANT'transperant will that cause any issues in the live n/w?

Thank you

MS

2 REPLIES

Re: Adding a VTP transperant switch to Switch domain with all VT

Not if it's transparent. Be careful about making it server though, make sure the rev level is lower than the current level.

Hope that helps.

New Member

Re: Adding a VTP transperant switch to Switch domain with all VT

Thank you.. Transperant only. Not going to make it server.

MS

98
Views
4
Helpful
2
Replies