Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding new module to 6509

I am trying to add a new WS-X6148A-GE-45AF module to my existing 6509 swich. My switch is IOS version 12.2(17r)S4. I am running 2 WS-X6548-GE-45AF that are working fine. When I run sh power it says my card is not supported. Do I need to upgrade my IOS?

3 REPLIES
Hall of Fame Super Blue

Re: Adding new module to 6509

Unfortunately yes you do.

WS-X6548-GE-45AF requirements:

With Supervisor Engine 720

(except WS-F6K-GE48-AF or WS-F6K-48-AF)

12.2(17a)SX

WS-F6K-GE48-AF or WS-F6K-48-AF

with Supervisor Engine 720

12.2(17d)SXB

WS-X6148A-GE-45AF requirements:

With Supervisor Engine 720

12.2(18)SXF

Full link to release notes -

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/release/notes/OL_4164.html

Jon

New Member

Re: Adding new module to 6509

Thanks

Re: Adding new module to 6509

The WS-X6148A-GE-45AF requires the following IOS versions.

Supervisor Engine 720 - 12.2(18)SXF

Supervisor Engine 32 - 12.2(18)SXF

Supervisor Engine 2 - 12.2(18)SXF2

You can reference this in the release notes for the 12.2(18)SXF release.

HTH,

Mark

182
Views
0
Helpful
3
Replies